ViewSonic VA2037m-LED User Manual

7
Wall Mounting (Optional) For use only with UL Listed Wall Mount Bracket
To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
®
or your local
dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD
display from a desk-mounted to a wall-mounted display, do the following:
Step 1. Verify that the power button is turned Off, then disconnect the power cord.
Step 2. Lay the LCD display face down on a towel or blanket.
Step 3. Remove the two screws attaching the base.
Step 4. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm
x 100 mm distance), using screws of correct length.
Step 5. Attach the LCD display to the wall, following the instructions in the wall-mounting
kit.
Step 4. Four VESA
screw holes
Step 3. 1 screws
attaching the base

ViewSonic VA2037m-LED Specifications

General

Color	black
Tiltable	yes
Touch Screen	no
Webcam	yes
OS Compatibility	windows, mac
Screen Size	19.5 inches
Aspect Ratio	16:9
Resolution	1600 x 900
Native Resolution	1600 x 900
Refresh Rate	60hz
Horizontal Viewing Angle	170 degrees
Vertical Viewing Angle	160 degrees
Response Time	5 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	10, 000, 000:1
Horizontal Scan Rate	82 kilohertz
Built-In Speakers	yes
Power Consumption	18 watts
Depth with Stand	7.1 inches
Width with Stand	18.6 inches
Net Weight without Stand	6.2 pounds