16
3-3. Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the
on-screen OSD control settings.
Standby Power On/Off
Power light
Blue = ON
Amber = Power Saving
[1]
Displays the Main Menu or exits the control screen and
saves adjustments.
[2]
Displays the control screen for the highlighted control.
Also a shortcut to Input toggle.
▲/▼
Scrolls through menu options and adjusts the displayed
control settings.
Blue Light Filter (▼) / ViewMode (▲)
Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear
automatically after about 15 seconds. This is adjustable through
the OSD timeout setting in the setup menu.
2. To select a control to adjust, press ▲ or ▼ to scroll up or down
in the Main Menu.
3. After the desired control is selected, press button [2].
4. To save setting adjustments and exit the menu, press button [1]
until the OSD disappears.
To Next Page
Loading...
