To Next Page
A
Allen CookeAug 21, 2025
How to adjust brightness on ViewSonic VA2747-mhj?
- MMichael HernandezAug 21, 2025
Adjust the brightness and contrast settings via the OSD Menu. If the image is still not correct, reset the monitor to factory settings.
How to adjust brightness on ViewSonic VA2747-mhj?
Adjust the brightness and contrast settings via the OSD Menu. If the image is still not correct, reset the monitor to factory settings.
How to fix a blurred screen image on a ViewSonic VA2747-mhj Monitor?
Adjust the resolution to the correct Aspect Ratio. If the image is still blurred, reset the monitor to factory settings.
What to do if ViewSonic VA2747-mhj has power but no image?
First, ensure the video cable connecting the monitor to the computer is properly and securely connected. If the connection is secure, adjust the brightness and contrast settings. Also, make sure the correct input source is selected.
Why does my ViewSonic VA2747-mhj have wrong colors?
Loose or broken pins in the cable connector could cause an improper connection. If any colors (red, green, or blue) are missing, check the video cable to make sure it is properly and securely connected. Also, try connecting the monitor to another computer. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
Why does the ViewSonic monitor screen image cut in and out?
Make sure the correct input source is selected. Check for bent or broken pins in the video cable connector. Make sure the video cable connecting the monitor to the computer is properly and securely connected.
What to do if external device is connected, but no image appears on ViewSonic VA2747-mhj?
Make sure the Power is On. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected.
Why there is no audio output from my ViewSonic VA2747-mhj Monitor?
If you're using headphones, check that the mini stereo jack is correctly connected. Also, ensure that the volume isn't muted or set to 0. Finally, verify the Audio Input setting.
Why are my USB devices not working on ViewSonic monitor?
First, make sure the USB cable is connected properly. If the issue persists, try changing to another USB port (if applicable). Some USB devices require a higher electric current; in this case, connect the device directly to the computer.
What to do if OSD Menu does not appear on ViewSonic VA2747-mhj Monitor?
Check whether the OSD Menu is locked. If it is, press and hold the 3 and 5 key for 10 seconds. If the OSD Menu is still inaccessible, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
Why are some OSD menus not selectable on my ViewSonic VA2747-mhj?
Adjust the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
Step-by-step guide for attaching the monitor stand.
Instructions for mounting the monitor on a wall.
Steps to connect the monitor to a power source.
How to connect video and audio sources to the monitor.
Steps for powering the monitor on and off.
Overview of the monitor's control panel buttons and functions.
Guide on navigating and using the OSD menu for settings.
Detailed technical specifications of the monitor.
General| Color | black |
|---|---|
| Screen Type | led |
| Tiltable | yes |
| Wall Mount | 100mm x 100mm |
| Touch Screen | no |
| Webcam | no |
| OS Compatibility | windows, mac |
| Screen Size | 27 inches |
| Panel Type | mva |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 |
| Native Resolution | 1920 x 1080 |
| Refresh Rate | 75hz |
| Horizontal Viewing Angle | 178 degrees |
| Vertical Viewing Angle | 178 degrees |
| Response Time | 5 milliseconds |
| Brightness | 250 candela per square meter |
| Contrast Ratio | 50, 000, 000:1 |
| Synchronization | vsync |
| Horizontal Scan Rate | 86 kilohertz |
| HDR | no |
| Built-In Speakers | yes |
| Interface Connectors | 1 x vga |
| HDMI Ports | 1 |
| Headphones Output | yes |
| Voice Assistant | no |
| Power Saving Mode | 0.3 watts |
| Power Consumption | 26 watts |
| Depth with Stand | 8 39/50 inches |
| Height with Stand | 20 3/4 inches |
| Width with Stand | 24 1/5 inches |
| Depth without Stand | 1 9/10 inches |
| Height without Stand | 14 1/2 inches |
| Net Weight without Stand | 8.2 pounds |
