How do I fix ViewSonic Monitor USB devices not working?
If USB devices connected to your ViewSonic monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port, if available. Note that some USB devices require a higher electric current, so connect the device directly to the computer in such cases.
What to do if ViewSonic VA3209U-2K OSD menu does not appear?
If the OSD Menu does not appear on your ViewSonic monitor, check whether the OSD Menu is locked. If it is not locked, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
Why some menus aren’t selectable in the OSD of ViewSonic VA3209U-2K Monitor?
If some menus aren’t selectable in the OSD of your ViewSonic monitor, adjust the ViewMode or the input source. If the issue persists, reset the monitor to factory settings.
Why there is no audio output from ViewSonic Monitor?
If there is no audio output from your ViewSonic monitor, ensure the mini stereo jack is connected if you are using ear-/headphones. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
General| Screen Size | 32 inches |
|---|---|
| Resolution | 2560 x 1440 (QHD) |
| Panel Type | IPS |
| Refresh Rate | 75 Hz |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 4 ms (GtG) |
| VESA Mount Compatible | Yes (100 x 100 mm) |
| Aspect Ratio | 16:9 |
| Connectivity | HDMI, DisplayPort |
| Viewing Angle | 178° (H) / 178° (V) |
| Input Ports | HDMI 1.4 x 1, DisplayPort 1.2 x 1 |
To Next Page
