ViewSonic VB-STND-009 - Initial Setup; Assembling the Product

8
Inial Setup
Assembling the Product
1. Engage the break on the wheels of the four Casters (F).
2. Screw the four Casters (F) into the Le (A) and Right Columns (B) using the
20xØ12.5x3.1 mm Spring Washer (J) and 24x12.5x1.5 mm Washer (I).
3. There are two combinaons of mounng holes, on the Le (A) and Right
Columns (B), for the Wall Plate (D).
Reserve 8 mm