ViewSonic VFA720W-10 User Manual

5
Identify the Parts
1.
/
Shortpress:PowerOn.
Pause or Play.
MovetheselectionUp.
Pressandhold1second:Enter.
Pressandhold3seconds:PowerOff.
2.
MovetheselectionLeft,displaythePreviousphoto.
3.
MovetheselectionRight,displaytheNextphoto.
4.
Shortpress:MovetheselectionDown,Exitslideshow.
Pressandhold2seconds:ShoworclosetheOSDMenuMode.
OSDMenuModewillcloseautomaticallyafter10secondsofmenuinactivity.
5.
USB port for USB Flash Drives
6.
Card slot for SD, SDHC, MMC, MS
7.
DC power input
8.
Stand
Setup Up the Digital Photo Frame
TheDigitalPhotoFrameiseasytosetup.Justfollowthesesteps:
1. Insert the stand with the notch facing up.
2. Insert a memory card into appropriate slot.
  SD,SDHC,MMC,MS.
  Note:Thecardwillonlytinonedirection;donotforceit.Thecardshouldtsnugly
when properly inserted. Please see the memory card diagrams printed on the back of the
photo frame.

ViewSonic VFA720W-10 Specifications

General

Product	17.8cm/7.0” LCD Screen Digital Photo Frame
File Format	JPEG, BMP (Up to 18 million pixel)
Feature	Slideshow mode Multiple transitional Style for Slideshow Variable Speed for Slide Show
Resolution	480 x 234 pixels
Memory Card Format	SD, SDHC, MMC, MS (max:32GB)
USB Port	USB 2.0 (Host)
Power Adapter Input	100V-240V AC, 50~60Hz
Power Adapter output	5V DC, 1A