ViewSonic Corporation Confidential - Do Not Copy VG930m-3_VA930m-1
27
Step17.2.4.3 In this dialog box. at first , key in or press the “up toward” key to change the command number to
4. second, key “94,94,AC,CA,53”in the ISP slave add. Slave b add. Command1.Command2. command3.table,
the below form showed the data list
Setp17.2.4.4 Select MTV Type in the “MTV type” list . VG930 monitor must be choose the
“MTV512M64”option
To Next Page
Loading...
