Why is there no image on my ViewSonic VG3448 even though the power is on?
If your ViewSonic monitor has power but no image, ensure the video cable connecting the monitor to the computer is properly and securely connected. You may also need to adjust the brightness and contrast settings. Finally, verify that the correct input source is selected.
What to do if the external device is connected, but no image appears on the ViewSonic VG3448 Monitor?
If an external device is connected to your ViewSonic monitor but no image appears, first make sure the power is on. Then, adjust the brightness and contrast via the OSD Menu. Also, check the connecting cable and ensure it is properly and securely connected.
What to do if the screen image cuts in and out on ViewSonic VG3448 Monitor?
If the screen image on your ViewSonic monitor cuts in and out, first make sure the correct input source is selected. Then, check for bent or broken pins in the video cable connector. Also, ensure the video cable connecting the monitor to the computer is properly and securely connected.
How to fix wrong or abnormal colors on ViewSonic Monitor?
If you notice wrong or abnormal colors on your ViewSonic monitor, and if any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
How to fix a screen image that is too light or dark on a ViewSonic Monitor?
To fix a screen image that is too light or dark on your ViewSonic monitor, adjust the brightness and contrast settings via the OSD Menu. If that doesn't work, reset the monitor to factory settings.
How to fix a blurred screen image on a ViewSonic Monitor?
To fix a blurred screen image on your ViewSonic monitor, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
What to do if ViewSonic VG3448 Monitor control panel keys do not work?
If the control panel keys on your ViewSonic monitor are not working, try pressing only one key at a time. If the problem persists, restart the computer.
Why does my ViewSonic VG3448 Monitor screen appear yellow?
If your ViewSonic monitor screen appears yellow, make sure the "Blue Light Filter" is turned Off.
What to do if USB devices connected to the ViewSonic VG3448 Monitor do not work?
If USB devices connected to your ViewSonic monitor are not working, ensure the USB cable is connected properly. If applicable, try changing to another USB port. Some USB devices require a higher electric current, so connect the device directly to the computer.
How do I center the screen correctly on my ViewSonic Monitor?
To center the screen correctly on your ViewSonic monitor, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If these steps do not work, reset the monitor to factory settings.
Step-by-step guide to assembling and attaching the monitor stand.
Instructions for mounting the monitor using a VESA compatible kit.
Guides on customizing monitor settings via the OSD menu.
Solutions for the monitor not turning on.
Steps to resolve issues with OSD menu access.
Contact information for technical support and product service.
Instructions on how to obtain warranty service or support.
General| Panel type | VA |
|---|---|
| Color depth | 10 bit |
| Pixel pitch | 0.233 x 0.233 mm |
| Screen shape | Flat |
| Display surface | Matt |
| Display diagonal | 34.1 \ |
| Surface hardness | 3H |
| Adobe RGB coverage | 74 % |
| Display technology | LED |
| Native aspect ratio | 21:9 |
| Maximum refresh rate | 60 Hz |
| NTSC coverage (typical) | 72 % |
| Viewable size, vertical | 335 mm |
| sRGB coverage (typical) | 95 % |
| Contrast ratio (dynamic) | 50000000:1 |
| Display number of colors | 1.07 billion colors |
| Viewable size, horizontal | 800 mm |
| Digital vertical frequency | 24 - 100 Hz |
| Digital horizontal frequency | 15 - 150 kHz |
| Display brightness (typical) | 300 cd/m² |
| RMS rated power | 6 W |
| Number of speakers | 2 |
| HDMI version | 1.4 |
| USB hub version | 3.2 Gen 1 (3.1 Gen 1) |
| DisplayPort version | 1.2 |
| USB upstream port type | USB Type-B |
| USB Type-A downstream ports quantity | 4 |
| Certification | cTUVus, FCC-B, ICES003, Energy Star 8.0, EPEAT Silver, CEC, MX-CoC, Mexico Energy, CE, CE EMC, CB, RoHS, ErP, REACH, WEEE, EAC, UkrSEPRO, RCM, CCC, China RoHS, China Energy Label |
| Product color | Black |
| Country of origin | China |
| Market positioning | Business |
| NVIDIA G-SYNC | - |
| Compatible operating systems | Windows 7/8/8.1/10, macOS |
| Tilt angle range | -5 - 40 ° |
| Cable lock slot type | Kensington |
| Number of OSD languages | 14 |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 35 W |
| Cables included | AC, DisplayPort to Mini DisplayPort, USB |
| DisplayPort cable length | 1.8 m |
| Package type | Box |
| Package depth | 525 mm |
| Package width | 945 mm |
| Package height | 234 mm |
| Package weight | 13400 g |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 236 mm |
|---|---|
| Width (with stand) | 825 mm |
| Height (with stand) | 408 mm |
| Weight (with stand) | 8600 g |
| Depth (without stand) | 51 mm |
| Height (without stand) | 366 mm |
| Weight (without stand) | 6000 g |
To Next Page
