ViewPad 10 Touch Panel Firmware Update Procedure
Equipment required: USB Mouse, USB Keyboard (optional)
1. Make sure the AC Adapter is connected to the ViewPad 10 during the firmware update to prevent power
loss.
2. Plug the USB Mouse (and USB Keyboard).
3. Boot the ViewPad 10 in Windows 7 mode. Extract the firmware zip file to a folder on the desktop.
4. Open the folder and find HID_GUI_V1.2.exe. Right-click on the executable and select “Run as
Administrator”. A “User Account Control” dialog box will appear. Click “Yes” to allow the change then
you will see the screen below:
5. Under EEPROM download, click OPEN and the tool will automatically browse to a folder to include a file
named “Hanvon10p1_v89r1003b1_1D_20110310_HC.eep.pix”.
6. Double click Hanvon10p1_v89r1003b1_1D_20110310_HC.eep.pix, you will see it is added to the dialog
box of the updating tool. DO NOT click any button at this time.
To Next Page
Need help?
General
