6
Cellular Data Network (3G Data) Setup
Warning: ZTE 3G does not support hot-plug detect. Please make sure the device is
powered down when inserting the SIM. Inserting SIM while the device’s
power is ON will cause system shutdown.
1. Power down the device.
2. Insert SIM (gold contacts facing up).
3. Power up the device.
4. At Windows desktop, tap on
icon to open ZTE 3G control center.
Fig. 2-3 ZTE 3G Control Center
5. After initializing, the SIM card will be detected.
Fig. 2-4 SIM Card Recognized
6. Tap on button to establish 3G data connection.
Fig. 2-5 3G Data Connected
To Next Page
Loading...
