ViewSonic VP171s - Setup Procedure

VP171
A1T020100001
VLCDS25972-1W
Power Adapter for Fixture
(P/N: 47.58201.001)
LTP Cable (P/N: 42.59906.001)
1. Connect P2 of Fixture with printer port of PC by LTP Cable.
2. Connect P1 of Fixture with VP171/s/b Monitor by VGA Cable.
3. Plug Power Adapter to Fixture.
4. Connect Power Cord to VP171/s/b Monitor, and turn on the Power Switch.
5. Connect PC to the additional monitor.
P2 : to LTP Cable
JP1 : to Power
Adapter
P1 : to VGA Cable
VGA Port
Connect to Power Cord
Turn on the Power Switch
ViewSonic Corporation
39
Confidential – Do Not Copy
VP171/b/s
Set-up Procedure
6-2