ViewSonic VP3481 - Page 51

51
 
Mul-Picture O
Disable this funcon.
Quad Windows
Display four windows on a 2x2 split screen. User can specify
the input source for each screen. For more informaon,
refer to the “Quad Windows” secon on page 57.
PBP Top-Boom
Display two windows, a 1x1 split screen, side-by-side on the
top and boom of the screen. User can specify the input
source for each screen. For more informaon, refer to the
“PBP (Picture-by-Picture)” secon on page 59.
PBP Le-Right
Display two windows, a 1x1 split screen, side-by-side on
the le and right of the screen. User can specify the input
source for each screen. For more informaon, refer to the
“PBP (Picture-by-Picture)” secon on page 59.
PIP
Split the screen into two parts, a main window and an inset
window. User can specify the input source for each screen.
For more informaon, refer to the “PIP (Picture-in-Picture)”
secon on page 61.
Dual Color
Display two dierent color sengs in PIP or PBP mode. For
more informaon, refer to the “Dual Color” secon on page
55.
ECO Mode Choose between various modes, based on power
consumpon.
DispayPort Enable DisplayPort 1.1 or 1.2 support.
HDMI 2.0 Enable/Disable HDMI 2.0 support.
DDC/CI Enable this opon to allow the monitor control via the
graphics card.
Save As Set the personalized OSD conguraons for User 1/User 2/
User 3. For more informaon, refer to “Hot Keys” on page
25.
All Recall Resets all sengs to their default values.