ViewSonic VP730 - Specification

2.SPECIFICATIONS
GENERAL specification
Test Resolution & Frequency 1280x1024 @ 60Hz
Test Image Size Full Size
Contrast and Brightness Controls
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Input Connector D-SUB1= DB-15(Analog)
D-SUB2= DB-15(Analog)
DVI= DVI-D(Digital)
Default Input Connector Defaults to the first detected input
Video Cable Strain Relief
Equal to twice the weight of the monitor for
five minutes
Video Cable Connector DB-15 Pin
out
Compliant DDC 2B
Video Signals
Video RGB (Analog)
Separate Sync / Composite Sync / SOG
TMDS (Digital)
Video Impedance 75 Ohms (Analog), 100 Ohms (Digital)
Maximum PC Video Signal 950 mV with no damage to monitor
Maximum Mac Video Signal 1250 mV with no damage to monitor
Sync Signals TTL
DDC/CI Compliant with Revision 1.0
Sync Compatibility
Separate Sync / Composite Sync / SOG
Video Compatibility
Shall be compatible with all PC type
computers, Macintosh computers, and
after market video cards
Resolution Compatibility
640 x 350, 640 x 400, 640 x 480, 640 x
870, 720 x 400, 720 x 480, 720 x 576, 800
x 600, 832 x 624, 1024 x 768, 1152 x 864,
1152 x 870, 1280 x 720, 1280 x 768, 1280
x 960, 1280 x 1024
Exclusions Not compatible with interlaced video
Horizontal / Vertical Frequency
Horizontal Frequency 24 – 82 kHz
Vertical Refresh Rate 50 – 85 Hz
Maximum Pixel Clock 135 MHz
Sync Polarity Independent of sync polarity
5
D o Not Copy V P730/bViewSonic Corporation Confidential