ViewSonic VS11354 - Adjustment Procedure

ViewSonic Corporation Confidential - Do Not Copy VA1930wm-1
28
5. Adjustment Procedure
1. Key Function Description
CONTROL KEY KEYS FUNCTION
[AUTO] [2] By pressing [AUTO] key, “Auto Image Adjust” is performed
[MENU] [1] By pressing [MENU] key, Main menu display
[▼] [▲]
A. When “MENU OSD” display, press these keys to change the contents of an
adjustment item, or change an adjustment value
B. When “MENU OSD” is un-display, press these keys to change brightness and
contrast
[POWER] Power on or power off the monitor
2. Hot Key Operation
3. OSD Control
3.1 OSD table
Layer 1 Layer 2 Layer 3
Auto Image Adjust
Contrast (+ / -) *3,4
Contrast/Brightness
Brightness (+ / -) *3,4
Volume Volume (+ / -)
Audio
Mute
On/Off
sRGB
9300K
7500K
6500K
5400K
Red (+ / -)
Color Adjust
User Color
Green (+ / -)
Hot Key Function
Item Function Detail
Recall Contrast or Brightness while in the Contrast or Brightness adjustment;
[▲] + [▼]
Recall both Contrast and Brightness when the OSD is not open
[1] +[2] Toggle 720x400 and 640x400 mode when input 720x400 or 640x400 mode
[1] + [▼] + [▲]
(keep pushing 5 sec)
White Balance (Not shown on user’s guide)
[1] + [▼] Power Lock
[1] + [▲] OSD Lock
[▼] + [▲]+ [ ] Enter Factory Mode
Remark: All the function above are only available while OSD off