29
Power
Adaptor
Input Voltage 100-240 VAC, 50/60 Hz (auto switch)
Display area Full Scan 521 mm (H) x 293 mm (V)
20.5” (H) x 11.5” (V)
Operating
conditions
Temperature
Humidity
Altitude
+32 °F to +104 °F (0 °C to +40 °C)
10% to 90% (non-condensing)
To 10,000 feet
Storage
conditions
Temperature
Humidity
Altitude
-4 °F to +140 °F (-20 °C to +60 °C)
5% to 90% (non-condensing)
To 40,000 feet
Dimensions Physical 544 mm (W) x 407 mm (H) x 199 mm (D)
21.4” (W) x 16” (H) x 7.8” (D)
Wall Mount
Max
Loading
Hole pattern
(W x H; mm)
Interface Pad
(W x H x D)
Pad
Hole
Screw Q’ty &
Specication
14kg 75mm x 75mm
115 mm x
115 mm x
2.6 mm
Ø 5mm
4 piece
M4 x 10mm
Do not screw torque over 12 kgf, as it may damage the
display.
Weight Physical 7.11 lb (3.2 kg)
Power saving
modes
On
2
Off
24W (Typical) (Blue LED)
<0.3W
1
Do not set the graphics card in your computer to exceed these
timing mode; doing so may result in permanent damage to the
display.
2
The test condition follows EEI standard
To Next Page
Loading...
