To Next PageTo Next PageWhat to do if my ViewSonic Monitor has no picture or sound?
If your ViewSonic Monitor displays no picture and no sound, verify the power status. Also, check the signal cable and ensure that the internal PC is correctly installed.
Why does my ViewSonic Monitor turn off unexpectedly?
If your ViewSonic Monitor turns off unexpectedly, check whether Sleep mode is enabled. Also, check if there is a power outage in your area. You can also turn on the display and see if the problem is with the signal and control system.
Why is the picture on my ViewSonic VS17435 unclear or cutting in and out?
If your ViewSonic Monitor picture is unclear or cuts in and out, check the signal cable. Also, check to see if other electronics are interrupting the signal.
How to improve poor picture quality on a ViewSonic VS17435 Monitor?
If your ViewSonic Monitor is producing poor picture quality, start by adjusting the chroma, brightness, and contrast settings in the menu. If the issue persists, check the signal cable.
Why is there no sound coming from my ViewSonic Monitor?
If you are not getting any sound from your ViewSonic Monitor, first press the Mute/Unmute button. If that doesn't work, adjust the volume. Finally, check the audio cable.
How to resolve a 'No PC signal' error on a ViewSonic VS17435 Monitor?
If your ViewSonic Monitor displays 'No PC signal', check the display settings and the display resolution. You might also need to adjust the Hs & Vs (synchronization) settings using the OSD menu.
What to do if the touch function isn't working on my ViewSonic Monitor?
If the touch function on your ViewSonic Monitor isn't working, check that the drivers are installed correctly, and reinstall them if necessary. Also, check the setup and align it and make sure the touch pen is working properly.
How to fix a ViewSonic Monitor remote control that is not working?
If the remote control for your ViewSonic Monitor isn't working, first ensure nothing is blocking the remote control receiver on the display. Next, check if the batteries in the remote are correctly installed. Finally, try replacing the batteries.
How to fix sound coming from only one speaker on a ViewSonic VS17435?
If your ViewSonic Monitor only outputs sound from one speaker, adjust the sound balance in the menu. Also, check the sound control panel settings of the computer and the audio cable.
How to get rid of background streaking on my ViewSonic VS17435?
If your ViewSonic Monitor is showing background streaking, choose auto adjust. If the issue persists, adjust the clock and phase settings.
Description of the device's physical components and controls.
Information on the remote control, its functions, and battery installation.
Steps for connecting devices via VGA, HDMI, AV, and SPDIF.
How to connect USB, microphone, and media players.
Instructions for device power management and initial configuration.
Explanation of the customizable welcome screen and its features.
Description of the toolbar and its various functions.
How to access and navigate the device's on-screen display menu.
Settings for input sources, backlight, and Flicker Free.
Details on myViewBoard and vBoard Lite annotation tools.
Casting content from devices to the ViewBoard.
Common problems and their solutions for the ViewBoard.
General