ViewSonic VS19852 - Page 47

47
Menu Opon Descripon
Power Indicator
Turns the power indicator light on or o. When turned on,
the power indicator light will be blue when the monitor is
turned on.
Auto Power O
Sets the monitor to automacally turn o aer a certain
amount of me.
Sleep
Sets the amount of idle me before the monitor enters
Sleep mode.
ECO Mode
Adjusts the power consumpon of the monitor.
NOTE: Energy Saving Mode is on by default. Once
turned o, the brightness level can be adjusted
to the maximum level.
DDC/CI
Allows the monitor control via the connected computer’s
graphics card.
HDMI 2.0
Enables HDMI 2.0 support.
NOTE:
• If the monitor shows no video signal via the
HDMI 2.1 port. Please turn on HDMI 2.0. For
addional informaon about HDMI 2.1 support,
contact your graphics card manufacturer.
• HDMI 2.0 supports up to 2560 x 1440 @ 100Hz.
DisplayPort 1.2
Enables DisplayPort 1.2 support.
NOTE: If the monitor shows no video signal via
the DisplayPort (v. 1.4) port. Please turn on
DisplayPort 1.2. For addional informaon
about DisplayPort v. 1.4 support, contact your
graphics card manufacturer.
Standby Charger
When turned on, the USB ports will connue to supply
power even when the monitor is in standby mode.
Memory Recall Resets all sengs to their default values.