4
Quick Installation
1. Connect video cable
• Make sure both the LCD display and computer are turned OFF.
• Remove rear panel covers if necessary.
• Connect the video cable from the LCD display to the computer.
2. Connect power cord (and AC/DC adapter if required)
1
3
5
79
11
1315
17
19
2
46810
1214
161820
Power Cord
Audio Out
HDMI
DVI
Audio in
DisplayPort
VGA
NOTE: DVI for VX2476 only, HDMI for VX2476-smhd/VX2476-shd only,
DisplayPort for VX2476-smhd/VX2476-shd only, Audio in for VX2476-smhd
only,Audio out for VX2476-smhd/VX2476-shd only
3. Turn ON LCD display and computer
Turn ON the LCD display, then turn ON the computer. This sequence (LCD
display before computer) is important.
4. Windows users: Set the timing mode (example: 1024x768)
For instructions on changing the resolution and refresh rate, see the graphics
card’s user guide.
5. Installation is complete. Enjoy your new ViewSonic LCD display.
Speaker
To Next Page
Loading...
