To Next PageTo Next PageHow to troubleshoot a ViewSonic VX2758-P-mhd that has no power?
If your ViewSonic Monitor isn't turning on, ensure the power button is pressed to activate it. Check that the power cord is correctly and securely plugged into both the monitor and the wall outlet. To confirm the outlet's functionality, try plugging in another electrical device.
What to do if my ViewSonic Monitor has power but no image on the screen?
If your ViewSonic Monitor has power but no image, check that the video cable is properly and securely connected to both the monitor and the computer. Also, adjust the brightness and contrast settings. Finally, make sure the correct input source is selected.
What to do if an external device is connected to my ViewSonic VX2758-P-mhd, but no image appears?
If the external device is connected, but no image appears on the screen of your ViewSonic Monitor, make sure the Power is On. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected.
Why does the screen image cut in and out on my ViewSonic VX2758-P-mhd Monitor?
If the screen image on your ViewSonic Monitor is cutting in and out, ensure the correct input source is selected. Inspect the video cable connector for any bent or broken pins. Also, make sure the video cable connecting the monitor to the computer is properly and securely connected.
What causes wrong colors on a ViewSonic VX2758-P-mhd Monitor?
If your ViewSonic Monitor is displaying wrong or abnormal colors, and if any colors (red, green, or blue) are missing, check the video cable to ensure it is properly and securely connected. You can also connect the monitor to another computer. If you have an older graphics card, contact ViewSonic® for a non-DDC adapter.
How to fix a ViewSonic Monitor screen that is too light or dark?
If the screen image on your ViewSonic Monitor is too light or dark, adjust the brightness and contrast settings via the OSD Menu. Alternatively, reset the monitor to its factory settings.
How to resolve a blurred screen image on a ViewSonic VX2758-P-mhd Monitor?
If the screen image on your ViewSonic Monitor is blurred, adjust the resolution to the correct Aspect Ratio. If that doesn't work, try resetting the monitor to factory settings.
What to do if the OSD Menu does not appear on my ViewSonic Monitor?
If the OSD Menu does not appear or the OSD controls are inaccessible on your ViewSonic Monitor, first check if the OSD Menu is locked by pressing and holding the 3 and 5 keys for 10 seconds. If that doesn't work, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor. As a last resort, reset the monitor to factory settings.
How do I center the screen correctly on my ViewSonic VX2758-P-mhd?
If the screen on your ViewSonic Monitor isn’t centered correctly, adjust the horizontal and vertical controls via the OSD Menu. Also, check the Aspect Ratio. If problems persist, reset the monitor to factory settings.
Why are some menus not selectable in the OSD of my ViewSonic VX2758-P-mhd Monitor?
If some menus aren’t selectable in the OSD on your ViewSonic Monitor, try adjusting the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
General| AMD FreeSync | Yes |
|---|---|
| NVIDIA G-SYNC | - |
| Panel type | TN |
| Pixel pitch | 0.311 x 0.311 mm |
| Screen shape | Flat |
| Backlight type | LED |
| Display surface | Gloss |
| Display diagonal | 27 \ |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080p |
| Viewing angle, vertical | 160 ° |
| Contrast ratio (dynamic) | 80000000:1 |
| Contrast ratio (typical) | 1000:1 |
| Viewing angle, horizontal | 170 ° |
| Digital vertical frequency | 48 - 144 Hz |
| Digital horizontal frequency | 30 - 180 kHz |
| Display brightness (typical) | 300 cd/m² |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| HDMI version | 1.4/2.0 |
| DisplayPort version | 1.2 |
| Headphone connectivity | 3.5 mm |
| RMS rated power | 5 W |
| Tilt angle range | -5 - 15 ° |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 39 W |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 35 W |
| Power consumption (PowerSave) | 25 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 90 % |
| Package depth | 174 mm |
| Package width | 675 mm |
| Package weight | 7800 g |
| Sustainability certificates | RoHS |
| Certification | cTUVus, FCC-B, ICES003, CEC, MX-CoC, Mexico Energy, CE, CE EMC, CB, RoHS, ErP, REACH, WEEE, EAC, UkrSEPRO, RCM, GEMS |
| Product color | Black |
| Market positioning | Gaming |
| Cables included | AC, HDMI |
Weight and Dimensions| Depth (with stand) | 189 mm |
|---|---|
| Height (with stand) | 450 mm |
| Weight (with stand) | 5100 g |
| Depth (without stand) | 50 mm |
| Width (without stand) | 615 mm |
| Height (without stand) | 365 mm |
| Weight (without stand) | 6000 g |
Details the front, rear views, and input/output ports of the monitor.
Step-by-step guide on how to attach the monitor stand to the display.
Instructions for securely mounting the monitor to a wall using VESA standards.
Instructions for connecting video sources like computers via HDMI or DisplayPort.
Lists technical details such as display size, resolution, input signals, and power requirements.
Offers solutions to common problems users might encounter with the monitor.
