ViewSonic VX2882-4KP User Manual

11
Wall Mounng
NOTE: Only use UL Cered wall mount kits.
75 mm
Refer to the table below for the standard dimensions for wall mount kits.
Maximum
Loading
Hole paern (W x H) Pad Hole Screw Specicaon & Quanty
14 kg 75 x 75 mm Ø 5 mm
M4 x 10 mm
4 pieces
NOTE: Wall mount kits are sold separately. To obtain a wall mounng kit,
contact ViewSonic® or your local dealer.
1. Turn o the device and disconnect all cables.
2. Place the device on a at, stable surface with the screen facing down.
3. Remove the monitor stand.
1 2
4. Aach the mounng bracket to the VESA mounng holes at the rear of the
device. Then secure it with four (4) screws (M4 x 10 mm).
5. Follow the instrucons that come with the wall mounng kit to mount the
monitor onto the wall.
75 mm

ViewSonic VX2882-4KP Specifications

General

Brand	ViewSonic
Model	VX2882-4KP
Category	Monitor
Language	English