What should I do if the control panel keys on my ViewSonic Monitor do not work?
If the control panel keys on your ViewSonic monitor do not work, try pressing only one key at a time. If the problem persists, restart the computer.
Why are some menus not selectable in the OSD of my ViewSonic XG2705-2?
If some menus aren’t selectable in the OSD of your ViewSonic monitor, adjust the ViewMode or the input source. If the issue persists, reset the monitor to factory settings.
How to troubleshoot no audio output from ViewSonic Monitor?
If there's no audio output from your ViewSonic monitor, and you're using ear-/headphones, ensure the mini stereo jack is connected. Also, make sure the volume is not muted, nor set to 0. Finally, check the Audio Input setting.
Why are USB devices connected to my ViewSonic XG2705-2 Monitor not working?
If USB devices connected to your ViewSonic monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port (if applicable). Some USB devices require a higher electric current; connect the device directly to the computer.
Instructions and specifications for mounting the monitor on a wall.
Steps for powering the monitor on and off.
Overview of the monitor's control panel buttons and their functions.
How to access and use the quick menu for common settings.
Detailed technical specifications of the monitor.
Details what is covered under the product warranty for Mexico.
Lists exclusions for the Mexico warranty.
Procedure for obtaining warranty service in Mexico.
Defines the scope of liability for damages in Mexico.
To Next Page
General