EasyManuals Logo

ViewSonic XG2705-2K User Manual

ViewSonic XG2705-2K
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
33
Troubleshoong
This secon describes some common problems that you may experience when
using the monitor.
Problem or Issue Possible Soluons
No power Make sure you have turned on the monitor by
pressing the Power buon.
Make sure the power cord is properly and securely
connected to the monitor and power outlet.
Plug another electrical device into the power outlet
to verify that the outlet is supplying power.
Power is On, but no
image appears on
screen
Make sure the video cable connecng the monitor
to the computer is properly and securely connected.
Adjust the brightness and contrast sengs.
Make sure the correct input source is selected.
Wrong or abnormal
colors
If any colors (red, green, or blue) are missing,
check the video cable to make sure it is properly
and securely connected. Loose or broken pins
in the cable connector could cause an improper
connecon.
Connect the monitor to another computer.
If you have an older graphics card, contact
ViewSonic® for a non-DDC adapter.
Screen image is too
light or dark
Adjust brightness and contrast sengs via the OSD
Menu.
Reset the monitor to factory sengs.
Screen image cuts in
and out
Make sure the correct input source is selected.
Check for bent or broken pins in the video cable
connector.
Make sure the video cable connecng the monitor
to the computer is properly and securely connected.
Screen image is
blurred
Adjust the resoluon to the correct Aspect Rao.
Reset the monitor to factory sengs.
The screen isn’t
centered correctly
Adjust the horizontal and vercal controls via the
OSD Menu.
Check the Aspect Rao.
Reset the monitor to factory sengs.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic XG2705-2K and is the answer not in the manual?

ViewSonic XG2705-2K Specifications

General IconGeneral
Colorblack
Screen Typelcd
Tiltableyes
Wall Mount100mm x 100mm
Touch Screenno
Webcamno
OS Compatibilitymac, windows
Screen Size27 inches
Panel Typeips
Aspect Ratio16:9
Resolution2560 x 1440
Native Resolution2560 x 1440
Refresh Rate144hz
Horizontal Viewing Angle178 degrees
Vertical Viewing Angle178 degrees
Response Time1 milliseconds
Brightness250 candela per square meter
Contrast Ratio1000:1
Synchronizationfreesync premium (amd adaptive sync)
Horizontal Scan Rate255 kilohertz
HDRno
Built-In Speakersyes
HDMI Ports2
Display Port Inputs1
Headphones Outputyes
Voice Assistantno
Power Saving Mode0.5 watts
Power Consumption51 watts
Depth with Stand9 41/100 inches
Height with Stand21 3/10 inches
Width with Stand21.3 inches
Depth without Stand2 1/5 inches
Height without Stand14 1/2 inches
Net Weight without Stand16.8 pounds

Related product manuals