Wireless Receiver Installation Instructions
Vigil Health Solutions Inc. Page 1
2102 - 4464 Markham Street
* Victoria, BC * Canada * V8Z 7X8
Phone: 250.383.6900 Toll Free: 1.877.850.1122
Fax: 250.383.6999 Web: www.vigil.com
Revised: June 26, 2006
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
R
R
e
e
c
c
e
e
i
i
v
v
e
e
r
r
a
a
n
n
d
d
S
S
e
e
r
r
v
v
e
e
r
r
W
W
R
R
X
X
&
&
W
W
S
S
R
R
X
X
Description
The Wireless Receiver (WRX) receives wireless transmissions from wireless devices and
communicates the data back to the central computer via the network cable. Wireless Receivers are
connected in series using a CAT5 cable and are terminated with RJ45 modular plugs. One Wireless
Receiver covers an area of approximately 100 feet square depending on building construction. The
Wireless Server Receiver (WSRX) is a variation of the Wireless Receiver that controls the wireless
portion of the communications. Typically one WSRX is required per building.
Mounting Instructions
Screw mount to wall or ceiling using mounting holes and appropriate mounting hardware for
location. Mounting hardware not supplied.
Typically mounted above the ceiling tile in a corridor. Mount vertically on the wall above the
ceiling tile, with the antenna pointing downward. Antenna does not need to protrude below tile.
Alternately, receivers can be mounted below the ceiling or on the ceiling. See below for mounting orientation options. If
mounting on a horizontal surface a 90-degree antenna will be required.
Screw antenna onto WRX. Position 90-degree antenna vertically as appropriate.
Do not mount Wireless Receivers on or near metal objects (HVAC, I Beams, etc) or electrical devices (motors, high
voltage switching, etc) as they can interfere with the wireless signals
Enclosure Dimensions 5.5” x 3” x 1”
Antenna 6.25” Detachable Nearson 900MHz ISM Band. Model 161.
Cable Type CAT5 or CAT5E 4 Pair 24AWG
Connectors RJ45 Modular Plug (AMP)
WRX with straight antenna
WRX with 90° antenna
To Next Page
Need help?
General