Vigor 2765 Series - User Manual

i
Vigor2765/2766 Series
VDSL2/G.Fast Security Router
Quick Start Guide
(Wireless models)
Guide Version: 1.3
Region: United Kingdom & Ireland
For updates and support, visit www.draytek.co.uk
August 2021 / Firmware V4.2.3_BT
Note: Product specification is subject to continuous evolution which may
not always be reflected in current documentation. For the formal specification
and details of the supported features of your product, please refer
only to the web site at www.draytek.co.uk
Regional and Network Compatibility
For all models, please check that you have been supplied with a device intended for your geographic region and networks.
Hardware and software varies by region, as well as local support and warranty services. To be sure of compatibility and local
support, ensure that you are buying the correct product through authorized channels. The outside of the product’s box will
state the region compatibility (e.g. “Applied Region: UK”). If you are unsure, check with DrayTek or your supplier. The use of
unofficial components (e.g. PSUs) or adapting interfaces or the use of unauthorized software/firmware may cause malfunction,
product damage or personal danger and invalidates your warranty and access to support services.

Summary

Safety and Warranty Information

Warranty Information

Panel Explanation

Hardware Installation

Connecting the Vigor Router

Setup and Configuration

Accessing Router Web Interface

Guide on opening a web browser and navigating to the router's IP address, including security warnings.

WAN1 Connection Setup

PPPoE Connection for FTTC VDSL2

Steps to configure PPPoE for VDSL2 internet connections using username and password.

DHCP;Static IP Connection for FTTC VDSL2

Steps to configure DHCP or Static IP for VDSL2 internet connections.

PPPoA Connection for ADSL;ADSL2+

Steps to configure PPPoA for ADSL or ADSL2+ internet connections using username and password.

WAN2 Ethernet Connection Setup

Enabling Ethernet WAN Port

Guide on enabling the router's P4 port as a WAN connection instead of a LAN port.

PPPoE Connection for WAN2

Steps to configure PPPoE for the Ethernet WAN connection using username and password.

Static or Dynamic IP for WAN2

WAN3;WAN4 3 G;4 G USB Modem Setup

PPP Mode for USB Modem

DHCP Mode for USB Modem

Vigor 2765 Series Specifications

General

WAN Ports	1 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
Wireless Frequency Bands	2.4 GHz, 5 GHz
USB Ports	2 x USB 2.0
Antennas	2 x External
QoS	Yes
Wi-Fi Standards	802.11a/b/g/n/ac
VPN Support	Yes
Firewall	Yes
VoIP	Yes
DSL Modem	VDSL2/ADSL2+ (Annex A, B, J, M, Q)