VigoTec VG-L7 User Manual

1/4
Hardware Installation Manual
Support：VG-L7
Overall Size：445×401×128mm（L×W×H）
Print Size：330×190mm（L×W）
Powered by VigoTec 2019.s
CATALOGUE
1. PARTS LIST .................................................................................................................................................................... 1
2. INSTALLATION ............................................................................................................................................................. 1
3. CONTROL-BOARD AND LASER................................................................................................................................ 2
4. NOTICE AND FAQ ........................................................................................................................................................ 3
5. UPDATE .......................................................................................................................................................................... 4
6. WARNING ...................................................................................................................................................................... 4
1. Parts list
Parts list of VG-L7 Kits
Serial N Parts Quantity
F1 Frame Part A (Lower part) 1
F2 Frame Part B (Upper part) 1
F3 Laser 1
/ Stepper Motor wire 2
/ Laser wire 1
/ Side to Main control board wire 1
/ USB cable 1
/ Power supply 1
/ Protective glass 1
/ Hardware installation manual 1
VG-L7 Tools
Serial N Parts Quantity
N1 M5 Nut (Frame Fixed) 4
N2 M3x12 Screw (Laser Fixed) 2
N3 M3 Nut (Laser Fixed) 2
2. Installation
Please read the following installation instructions and control board instructions carefully, and pay

VigoTec VG-L7 Specifications

General

Brand	VigoTec
Model	VG-L7
Category	Printer
Language	English

Summary

Parts List

Installation Guide

Assemble Components

Instructions for assembling upper and lower parts and attaching the laser module to the frame.

Wire and Board Connections

Guidance on connecting side, laser, and motor wires to the main control board.

Control Board and Laser Setup

Control Board Instructions

Details on connecting the main control board, side board, power supply, and computer.

Laser Operation Guide

Instructions for focusing the laser, adjusting focal length, and safety precautions.

Notices and Troubleshooting

Frequently Asked Questions

Answers to common issues regarding software, carving quality, and motor operation.

Software Update Information

Safety Warnings

General Safety Precautions

Prohibitions on laser eye irradiation, use without glasses, children, and unattended operation.