Related Products
The VE-3x5, VE-5x5, VE-6x7 and VE-5x10 add vandal and weather resistance, as well as ver-
satility to many Viking products. The VE-Series backboxes are available in black fine texture pow-
der painted steel or Marine Grade 316 stainless steel. The weather resistant boxes are designed
to be surface mounted to a wall, post, single gang box, or a VE-GNP gooseneck pedestal. Note:
The VE-3x5 is not compatible with the VE-GNP pedestals and is not available in stainless steel.
The VE-3x5 is designed to be used with the E-40-EWP or E-50-EWP Series entry
phones. The VE-5x5 is designed to be used with the E-10A-EWP, E-30-EWP, E-
30-PT-EWP, E-60-EWP, E-65-EWP, E-70-EWP, E-75-EWP entry phones, the E-
1600-20A-EWP, E-1600-20-IP-EWP, E-1600-30A-EWP and E-1600-30-IP-EWP
emergency phones, as well as the W-1000-EWP and W-3000-EWP handsfree
doorboxes. The VE-6x7 is designed to be used with the K-1700-3-EWP and K-
1705-EWP entry phones and the VE-5x10 is designed to be used with the K-1900-
7-EWP and the K-1900-8-EWP vandal resistant phones.
The VE-GNP gooseneck pedestals are designed to be
used with the VE-5x5, VE-6x7 and VE-5x10 backboxes
and are ideal for drive up communications. Note: The VE-3x5 is not compatible with the VE-GNP pedestals. The VE-PNL’s are VE-
Series backboxes with a blank aluminum panel. The user can customize the clear-coated aluminum panel to mount an PRX-1 card reader,
PRX-2 keypad or switch. The kits come complete with box, gasket, panel and screws. Model numbers that end with “SS” are stainless
steel version. Note: The use of magnets to mount the VE-Series enclosure to a metal surface can affect the operation of the enclosed
product.
VE-3x5
VE-5x5
VE-6x7
VE-5x10
VE-5x5-PNL-SS
VE-6x7-PNL-SS
VE-5x10-PNL-SS
VE-5x10-SS
VE-5x5-SS
VE-5x10-PNL
VE-5x5-PNL
VE-GNP-2
VE-GNP-IG
VE-GNP-SS
VE-GNP
For more information, see DOD# 424
Surface or Pedestal Mount Viking Products While
Maintaining Weather and Vandal Resistance
Add Panel Lighting to Your Viking VoIP Entry Phone
The VE-LIGHT kit adds bright LED illumination to any VoIP entry phone that is housed
in a Viking VE-5x5, VE-6x7 or VE-5x10 enclosure.
The stainless steel bracket is easily mounted using existing holes and hardware. Two
bright white LEDs are used as the light source, so there are no filaments to break or
bulbs to burn out.
12 VDC power adapter included. Any power source between 12 and 24 volts, AC or DC
can be used to supply the VE-LIGHT with power.
For more information, See DOD# 428.
VE-LIGHT shown right with Viking
E-30-IP and VE-5x5 (not included)
17
To Next Page
Loading...
