Viking Range 3 Series - Water System Connection & Filter Installation

8 EN
Refrigerator / User Manual
Installation
Before Installation
Make sure that you have everything necessary to ensure proper
installation before proceeding, including:
Your product comes with an internal water filter for use inside
the refrigerator. Part number of the filter is RWFRVFFR and
you can use this part number when ordering replacement
filters.
Normally, you are not required to tighten the union
with a tool. However, you can use a pliers or pliers
to tighten the union if there is a leak. DO NOT
overtighten
Connectng the water line
to the water supply
Connect the water line to a water supply valve. If a valve is not
present or you are not sure, consult a qualified plumber.
Connecting the water line
to the refrigerator
1. Remove the valve channel cover (A) from the water nlet valve.
2. Slp the unon (C) water nlet valve (B).
3. Push the water hose downwards frmly to slp t onto the water
nlet valve (B).
4. Tghten the unon (C) by hand to secure t onto the water nlet
valve.