FILTER CLEANING
(ALL SPAS except Viking 1P, Viking 2P & Viking 3)
Remove filter face cover by pulling straight up and slightly toward the
spa on front plate/face cover. (As shown below.) Remove access bas-
ket and unscrew filter cartridge(s) from housing. To reinstall weir door
assembly, door must be placed through throat of skimmer prior to slid-
ing assembly into place. Refer to filter cleaning procedure for Viking IP,
Viking 2P & Viking 3 on previous page. Note: Spas with this filter uti-
lize 50 sq. ft. cartridge filters.
FILTER CARTRIDGE REPLACEMENT
For round spas use Pleatco™ replacement filter: PWW10 (2 filters) OR
Unicel™ replacement filter: C-4310 (2 filters)
For ALL square spas use Pleatco™ replacement filter: PWW50P3 OR
Unicel™ replacement filter: 6CH940
19
A. Locate skimmer.
B. Remove front plate.
C. Remove basket & filters.
D. Clean per instructions.
To Next Page
Loading...
Need help?
General
