Need help?Do you have a question about the Viking spas Legacy 2 and is the answer not in the manual?
General| Brand | Viking spas |
|---|---|
| Model | Legacy 2 |
| Category | Hot Tub |
| Language | English |
Guidelines for safe spa usage, emphasizing supervision, caution, and avoiding risks.
Guidelines for selecting a stable and level surface for spa placement.
Requirements for deck and balcony construction to support spa weight and local codes.
Details on GFCI ratings and connection types for spa power.
Diagram and instructions for installing GFCI wiring for 220V systems.
General electrical wiring guidelines, materials, and code compliance.
Information on the three access points for running electrical conduit to the power system.
Information on different controller types and finding operating instructions via QR codes.
How to regulate the flow of water to the waterfall jet.
Details on the spa's LED lighting system and its color cycling capabilities.
Explanation of how to adjust spa jets and air controls for optimal hydrotherapy.
Procedures for filling the spa, checking water level, and inspecting for leaks.
Ensuring T-handled gate valves are open and retaining clips are in place during filling.
Guidance on setting up a chemical maintenance program and the importance of chemical balance.
Referring to dealer recommendations for initial sanitizing procedures.
Advice on using "stain n scale" chemicals for areas with high calcium content in water.
Step-by-step instructions for draining the spa water every 90 days.
Recommended cleaning agents for spa surfaces, avoiding abrasive solvents.
Guidance on preparing the spa for extended periods of non-use to prevent freeze damage.
How to wash spa pillows and the importance of removing them during storage.
Instructions for cleaning filters on Viking 1P, 2P & 3 models, including visual guides.
Procedures for cleaning filters on all spa models except Viking 1P, 2P & 3.
Specifies Pleatco and Unicel replacement filter models for round and square spas.
Checks for air locks and proper water flow as causes for the spa not heating.
Potential causes like closed gate valves, improper wiring, or low water level.
To Next Page