Viking CTG-1 - User Manual

PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Add Time Controlled Alert Tones and
Emergency Tones to Your Paging System
Features
• Accurate 24 hour digital time clock displays
hours and minutes
• User programmable 24 hour, 128 event timer
• Programmable day of week on/off feature
• Programmable single, double or triple alert
tone output (selectable bong or buzzer)
• Three contact closure controlled sounds:
1) Emergency siren (yelp) sound
2) Temporal (slow whoop) evacuation signal
*NFPA/ANSI compliant when used with
supporting equipment
3) Doorbell (chime) sound
• Volume controllable, 600 ohm line level audio
output
• Non-volatile programming memory
• Battery backup for maintaining clock time with
factory installed 9V NiMh rechargeable battery
• Two sets of DPDT relay contacts for muting
paging or background music during alert tones
• Switchable 50/60 Hz operation
• Signal the beginning and end of class periods,
breaks, and lunch periods for schools
• Signal the beginning and end of shifts, breaks, and
lunch periods for factories and other businesses
• Provides a doorbell and/or alarm sounds over an
existing paging system, for such applications as
door entry, fire, severe weather, etc.
• Use with Viking's DVA-2WA to provide timed
messages (DOD# 110)
Power: 120V AC/13.8V AC 1.25A UL listed adapter
provided
Dimensions: 133mm x 91mm x 44mm (5.25” x 3.6”
x 1.75”)
Weight: 0.9 Kg (2 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5%
to 95% non-condensing humidity
Connections: 12 position cage clamp terminal strip
Battery Backup: 9V NiMh rechargeable battery
(factory installed) maintains clock time for over 8 hours
Time Base: 50/60Hz AC power line
Time Base Battery Backup Accuracy: +/- 50 ppm
Audio Output: 600 ohm with volume adjust
potentiometer, maximum level = 17 dBm/5.4Vrms
across 600 ohm load
Relay Output: DPDT rated 30V DC @ 1A, 110V DC
@ 0.3A ,125V AC @ 0.5A (resistive loads)
CTG-1
Clock Controlled
Tone Generator
May 4, 2018
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
VIKING
Viking's model CTG-1 is a clock controlled tone
generator designed to provide accurately timed
bong alert tones or buzzer alert tone sounds
over an existing paging system.
The CTG-1 can be programmed to output
single, double or triple alert tones with up to
128 events in a 24 hour period. These
bong/buzzer sounds are ideal for indicating the
start and end of shifts, break times, lunch
periods, etc. for factories, schools, or any
business requiring an audible indication of
specified times. Each day of the week can be
programmed to either on or off, allowing you to
turn off the alert tones during specific days of
the week (weekends, etc.)
The CTG-1 has three contact closure inputs for
triggering an emergency siren, evacuation
signal or a doorbell sound.

Summary

Product Features

Applications

Technical Specifications

Features Overview

Control Buttons and Display

Details the function of setting buttons, mode button, and the display screen.

Battery Backup and Volume Control

Explains the 9V battery backup and the output volume control.

Terminal Pinouts

Diagram and description of terminal connections for sounds and relays.

Installation and Programming

Setting the Clock Time

Procedure to set the device's internal clock accurately.

Setting the Day of the Week

Steps to configure the current day for daily tone activation.

Turning Alert Tones On;Off

Configure daily alert tone activation or deactivation based on day of week.

Setting Timed Alert Tones

Programming specific times for alert tone activation.

Reviewing and Cancelling Tones

Procedures to review programmed events or cancel them.

Adjusting Output Volume

Steps to set the audio output level for alert tones.

Activating Contact Closure Tones

How to trigger sounds via dry contact closures for alarms.

Locking the CTG-1

Securing the device settings by locking operation.

Clearing Alert Tone Memory

Procedure to erase all programmed alert tone events.

DIP Switch and Shunt Settings

Configuration options for operation via DIP switches and shunts.

Operation

Changing Power Line Frequency

How to switch between 50 Hz and 60 Hz power line frequency.

Timed Event Operation

How the CTG-1 functions when clock times match programmed events.

Contact Closure Operation

Behavior when contact closures trigger sounds or relay actions.

Sound Output Specifications

Bong Alert Tone

Details frequency, duration, and timing for bong alert tones.

Buzzer Alert Tone

Details frequency, duration, and timing for buzzer alert tones.

Doorbell Tone

Specifications for the doorbell chime sound.

Evacuation Signal

Details for the temporal slow whoop evacuation signal.

Siren Tone

Details for the emergency siren (yelp) sound.

Other Applications

Warranty Information

FCC Requirements

Viking CTG-1 Specifications

General

Brand	Viking
Model	CTG-1
Category	Recording Equipment
Language	English