What to do if my Viking ME 545 V has starting problems or deteriorating motor performance?
If your Viking Lawn Mower is experiencing starting problems or the motor performance is deteriorating, it might be due to mowing grass that is too long or too wet; try working at an appropriate cutting height and mowing speed. Another cause could be a blocked mower housing; clean it, remembering to disconnect the mains plug first.
How to fix a Viking Lawn Mower ME 545 V Vario drive speed control that is not functioning?
If the Vario drive speed control on your Viking Lawn Mower ME 545 V is not functioning, make sure the lever is moved in the right direction. Also, the Vario drive cable might be disengaged or damaged; attach or replace it.
Why does my Viking ME 545 V frequently trip the mains fuse?
The mains fuse might be tripping due to several reasons. It could be due to no mains voltage, so check the fuse. The connection cable, plug, plug connector, or switch may be defective, in which case you should check and replace if necessary. Ensure you press the start button. The thermal motor overload protection might have been triggered; allow the appliance to cool before restarting. Finally, the mower housing could be blocked, so clean it after disconnecting the mains plug.
Why does my Viking ME 545 V vibrate excessively during operation?
Excessive vibration during operation of your Viking Lawn Mower may be attributed to several factors. The connection cord may be unsuitable; use a suitable connection cord. There might be a power overload, try connecting the appliance to another circuit. Also, the appliance may be overloaded due to mowing grass that is too long or too wet; work at an appropriate cutting height and mowing speed for the mowing conditions.
What to do if my Viking ME 545 V has a poor cut and the lawn is turning yellow?
If your Viking Lawn Mower is leaving a poor cut and your lawn is turning yellow, the mowing blade might be blunt or worn. Try re-sharpening or replacing the mowing blade. Also, the rate of feed might be too high in relation to the cutting height; reduce the rate of feed and/or select the correct cutting height.
What to do if there is no response when the wheel drive lever is actuated on my Viking Lawn Mower ME 545 V?
If there's no response when you actuate the wheel drive lever on your Viking Lawn Mower ME 545 V, the wheel drive cable may be incorrectly adjusted; readjust it. The V-belt could be worn, in which case you should replace it. The wheel drive cable might be damaged, for example, kinked, so replace it. Lastly, the gearbox could be defective; replace the gearbox.
Guidance on how to interpret symbols and text passages within the manual.
Explains symbols used to link figures on illustration pages with text passages.
Identifies the main components and parts of the lawn mower.
Essential safety regulations and precautions to be observed when operating the lawn mower.
Steps to take before operating, including personal protective equipment and area inspection.
Instructions and guidelines for safe and effective mowing operations on various terrains.
Explains various symbols used throughout the manual for clarity.
Lists the standard parts and accessories included with the lawn mower.
Step-by-step guide to assemble the handlebar and attach it to the lower handlebar.
Guides on attaching anti-kink cable protection to the left and right sides of the handlebar.
Instructions for fitting the upper and lower parts of the grass catcher bag together.
General guidelines and recommendations for maintaining the appliance and performing repairs.
Instructions for thorough cleaning of the lawn mower after each use.
Common faults, their possible causes, and recommended remedies for the lawn mower.
Diagnosing and resolving issues when the motor fails to start.
Detailed technical data, performance characteristics, and dimensions of the lawn mower models.
Official declaration of the product's compliance with relevant EU directives and standards.
A log for recording maintenance work performed by authorized VIKING dealers.
General| Cutting width | 43 cm |
|---|---|
| Cutting height | 25-75 mm |
| Weight | 12.5 kg |
| Engine Type | Electric |
| Engine Power | 1400 W |
To Next Page
