Need help?Do you have a question about the Viking R-6 and is the answer not in the manual?
General| Category | Gate Opener |
|---|---|
| Max Gate Weight | 600 lbs |
| Battery Backup | Optional |
| Maximum Gate Weight | 600 lbs |
| Power | AC |
| UL Rating | UL325 |
| Motor Type | DC |
Detailed list of all operator components and their part numbers.
Visual guide and descriptions of key external operator components.
Identification and description of terminals and indicators on the control board.
Guidelines for safe and compliant gate operator installation.
Procedures for routine maintenance and general safety guidelines.
Gate operator usage classes and entrapment protection requirements.
Instructions for installing alarm reset and warning placards.
Technical specifications including gate limits, weight, and power.
Options for concrete pad and post mounting the gate operator.
Guidance on gate operator placement and arm assembly setup.
Connecting high voltage, low voltage, or solar power.
Procedure for setting gate open and close limits.
Setting up wired or wireless communication between operators.
Configuring initial settings, ODS, heater, and lock mode.
Connecting UL and Re-Open monitored input terminals.
Connecting radio receivers, loop detectors, and command inputs.
Wiring magnetic locks and synchronizing with barrier arms.
Interpreting LEDs and LCD messages for diagnostics.
Step-by-step solutions for common operational problems.
Wiring details for access control devices and relays.
Wiring diagrams for common radio receiver models.
Requirements and installation for solar power systems.
To Next Page
