Viking RC-2A - User Manual

PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Control Relay Contacts Remotely
Features
The RC-2A Remote Controller provides remote
relay operation from any standard Touch Tone
telephone.
The controller is designed to be installed either lo-
cally or remotely. For local installations the RC-2A
can be installed in parallel on any analog commu-
nications path, such as analog C.O. lines or analog
PABX/KSU stations and will passively monitor for
Touch Tone commands.
For off-premise applications, the RC-2A will an-
swer analog C.O. lines or PABX/KSU stations after
a selectable ring delay. A field programmable ac-
cess code can be programmed to prevent unau-
thorized usage, and then the RC-2A can be
activated to allow remote relay operation.
• Programmable access code
• Normally open or normally closed relay
• Selectable relay closure times
• Selectable ring delay (1, 2, 6, or 15)
• Universal 12-24V AC/DC power input
• Easy installation with screw terminals
and dip switch programming
• Automatic disconnect or return to secure
mode after 60 seconds
• Power multiple units from one adapter
• One year warranty
Remote Control of:
• High security building entry
• Heating/cooling equipment
• Pumps and fans
• Security systems
• Gates
• Lighting
• PABX/KSU reset
Power: 120VAC / 12VDC 500mA UL listed
adapter provided, alternative power input:
12-24V AC/DC 200mA minimum
Dimensions: 133mm x 89mm x 44mm
(5.25” x 3.5” x 1.75”)
Shipping Weight: .9 kg (2 lbs)
Environmental: -40°C to 70°C (-40°F to
160°F) with 5% to 95% non-condensing hu-
midity
Relay Contact Ratings: 5A @ 30VDC/
250VAC
Connections: (1) 8 position screw terminal
block
RC-2A
Remote Touch Tone
Controller
April 16, 2013
Applications
Specifications
www.vikingelectronics.com
Information: (715) 386-8861
VIKING
Note: For doorstrike control with Viking W-Series
Doorboxes, see Viking model SRC-1 (DOD#175)
or C-1000B (DOD# 168).

Summary

Modes

Legacy Mode

Details the advantages and disadvantages of the Legacy mode.

Alternative Mode

Details the advantages and disadvantages of the Alternative mode.

Legacy Programming Mode

Security Access Code

Covers setting and disabling the security access code.

DIP Switch Settings

DIP Switch Configuration

Explains the function of DIP switches 1 through 7 for RC-2A operation.

Relay Activation Codes

Touch Tone Activation Commands

Lists pre-programmed touch tone codes for relay control.

Alternative Programming Mode

Security

Security settings in Alternative Programming Mode.

Entry Code Switches

Programming relay activation codes using entry code switches.

Operation

Legacy Mode Operation

Describes how to access and operate the RC-2A in Legacy Mode.

Accessing the RC-2 A Remotely

Accessing the RC-2 A Locally

Procedure for accessing the RC-2A locally via doorbox or dedicated line.

Alternative Mode Operation

Accessing the RC-2 A Remotely

Steps to access and operate the RC-2A in Alternative Mode remotely.

Warranty

Returning Product for Repair

Procedure for returning equipment for repair.

Limited Warranty

Details the one-year warranty terms and limitations.

FCC REQUIREMENTS

Part 15 Limitations

Explains FCC Part 15 compliance and potential interference.

Viking RC-2A Specifications

General

Brand	Viking
Model	RC-2A
Category	Controller
Language	English