1
RDMOR206SS
SERVICE MANUAL
In the interest of user-safety, the oven should be restored to its original condition and only parts identical to those specified
should be used.
WARNING TO SERVICE PERSONNEL: Microwave ovens contain circuitry capable of producing very high voltage and
current, contact with following parts may result in a severe, possibly fatal, electrical shock. (High Voltage Capacitor, High
Voltage Power Transformer, Magnetron, High Voltage Rectifier Assembly, High Voltage Harness etc..)
S32M340RDM6SS
OVER THE RANGE MICROWAVE OVEN
MODEL
RDMOR206SS
TABLE OF CONTENTS
Page
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY ..................... INSIDE FRONT COVER
BEFORE SERVICING ....................................................................................................... INSIDE FRONT COVER
MICROWAVE MEASUREMENT PROCEDURE ..................................................................................................... 4
WARNING TO SERVICE PERSONNEL ................................................................................................................. 6
FOREWORD AND WARNING ............................................................................................................................... 7
PRODUCT SPECIFICATIONS ............................................................................................................................... 8
GENERAL INFORMATION.................................................................................................................................... 8
OPERATION ......................................................................................................................................................... 11
TROUBLESHOOTING GUIDE ............................................................................................................................. 19
TEST PROCEDURE ............................................................................................................................................ 22
COMPONENT REPLACEMENT AND ADJUSTMENT PROCEDURE................................................................. 34
PICTORIAL DIAGRAM ......................................................................................................................................... 43
This document has been published
to be used for after sales service only.
The contents are subject to change
without notice
.
Range Corporation
111 Front St., Greenwood, MS 38930
Tel: (888) 845-4641
SMC-0027
To Next Page
Need help?
General
