Viale Vicenza 14
36063 Marostica VI - Italy
www.vimar.com
S6I.945.B0E 03 2101
The instruction manual is downloadable from the site www.vimar.com
Installation rules
Installation should be carried out by qualied personnel in compliance with the current regulations regarding the installation of electrical equipment in the country
where the products are installed.
Conformity
EMC directive
Standards EN 60065, EN 61000-6-1 and EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces of lead.
WEEE - Information for users
If the crossed-out bin symbol appears on the equipment or packaging, this means the product must not be included with other general waste at the end of
its working life. The user must take the worn product to a sorted waste center, or return it to the retailer when purchasing a new one. Products for disposal
can be consigned free of charge (without any new purchase obligation) to retailers with a sales area of at least 400m
2
, if they measure less than 25cm. An
ecient sorted waste collection for the environmentally friendly disposal of the used device, or its subsequent recycling, helps avoid the potential negative eects
on the environment and people’s health, and encourages the re-use and/or recycling of the construction materials.
To Previous Page
Loading...
