Vimar ELVOX - Page 23

23
TAB: 40507
EN
While conguration is in progress, the installer is informed of the status by some messages.
If a problem occurs during conguration and the procedure is interrupted, the installer will be notied by a message similar to that in the gure below.
If the conguration procedure is completed successfully, the screen will display a summary of the conguration information.
On completion of the procedure, the installer may proceed with customization of the parameters of the device, alternatively the default settings
may be maintained and the device may be used for call functions.
For details regarding call functions and all conguration parameters, refer to the chapters in the manual which can be downloaded from the
website www.vimar.com.
WiFi/Mobile devices
In the “WiFi/Mobile devices” section, you can set the parameters for connection to a Wi-Fi network or for activation of the Hotspot function
(network router), and also specify the mobile devices you wish to use for call transfers.
After having installed the Video Door app on your mobile and completed the Connection Wizard, follow the instructions of
the Conguration Wizard.
For further information, refer to the User Manual, which can be downloaded from the website www.vimar.com