VINCI COLD BREW 360 - HOW TO USE YOUR COLD BREW 360; Getting Started; Fill Water; Remove Lid;Remove Top Cap

2
HOW TO USE YOUR COLD BREW 360
Fill the Carafe with fresh, clean ROOM
TEMPERATURE water. Filtered water is best (or
recommended). Never fill past the Fill Line.
FILL LINE
Before you begin using your Cold Brew 360.
Remove the lid assembly and remove the
Holding Cup(H).
FILL 9
LEVEL
SCOOPS
RE-INSERT
TOP
FILTER
CAP
RE-INSERT
SERVING
LID
REMOVE
LID
REMOVE
TOP
FILTER
CAP
REMOVE
HOLDING
CUP
Using the included 2-Tablespoon Scoop(E), fill
the Filter Basket(B) with approximately 9 level
scoops of your preferred medium to coarse
grind coffee. NEVER overfill or compress the
grounds as it will hinder the brewing process.
Re-insert the Top Filter Cap(A) and Serving Lid(F).
Hold the Serving Lid(F) and twist counter
clockwise to remove the Filter Basket(B).
Set the lid aside and proceed to removing the
Top Filter Cap(A).
TIP: The Filter Basket(B) is full when there is
about 1 inch of free space at the top.
FILL CARAFE
WITH FRESH
ROOM
TEMPERATURE
WATER
1
3
2
4
GETTING STARTED
REMOVE LID/REMOVE TOP CAP
FILL WATER
FILL COFFEE