Need help?Do you have a question about the VINKA amslod DC40 and is the answer not in the manual?
Details the physical dimensions and appearance of the display unit.
Details the physical dimensions and appearance of the remote control unit.
Instructions for powering the E-bike system on and off using the display controls.
Description of the main display screen elements and default cycling mode.
How to activate and deactivate the push-assistance function for walking the bike.
Instructions on how to switch the bike's headlight on and off.
Guide to changing the motor assist levels using the +/- buttons.
Explanation of the visual representation of the battery's State of Charge.
How to interpret the display of motor power output levels via segments.
Information on how error codes are displayed and what they signify.
Steps to enter the settings menu by holding buttons and navigate options.
How to set or view the wheel diameter for accurate speed and distance readings.
Adjusting the specific speed for the walk-assist mode.
Understanding how the system enforces the maximum speed limit.
Guide to changing the display's backlight brightness levels.
How to toggle between metric (km/h) and imperial (mph) units.
Configuration options for how assist levels are displayed to the user.
Explanation of the GSGI feature for gear shifting calibration and reminders.
Viewing detailed system information like serial numbers and software versions.
Details on warranty coverage, duration, and conditions not covered.
List of damages and conditions excluded from warranty coverage.
To Next Page
General
