Need help?Do you have a question about the VINKA DR25 and is the answer not in the manual?
Identifies the product as an intelligent LCD display for e-bikes.
Visual representation and measurements of the display unit.
Details the layout and purpose of different areas on the display screen.
Describes the five physical buttons on the DR25 display and their uses.
Procedure for powering the E-bike system on and off using the display.
Information shown on the screen after the E-bike system is activated.
How to activate and deactivate the push-assistance feature for walking.
Managing the bike's lights and adjusting display backlight brightness.
Adjusting the motor's power assist levels and output.
Understanding the battery status and voltage representation.
How to interpret error codes and recommended actions for display issues.
Steps to enter the settings menu for configuration.
Guide to modifying parameters, entering edit state, and saving changes.
How to move between different settings menus and return to the main interface.
Details regarding the display of wheel diameter, not a settable parameter.
Shows the software version of the controller, which cannot be adjusted.
Shows the software version of the display unit, uploaded by the controller.
How to switch between Metric and Imperial units for speed and distance.
Procedure for changing the brightness level of the LCD screen.
Information on the speed limitation value, not adjustable by the user.
Setting the push-assist value and managing speed limits.
How to clear the recorded trip data.
Steps to confirm input and store settings when leaving the settings interface.
Details the warranty period and requirements for product usage.
Lists specific situations and damages not covered by the warranty.
Visual guide to the display's connector and its pinout.
Defines the function of each wire in the connection cable.
To Next Page
General
