3
苏州万佳电器有限公司
Suzhou wanjia Electric Co.,Ltd
.
Press the “MODE” button and switch between:
TRIP(Km)→ODO(Km)→ RANGE(Km) →Trip (Km)
Switching Push-assist Mode On/Off
To activate the push-assistance function, short press MODE button and hold the
DOWN button between 3S. E-bike is activated with a uniform speed of 6 km/h
while the screen displays shown “ ”.
The push-assistance function will be switched off as soon as you release the
DOWN button and ebike gets back to the status before the push-assistance is
engaged.
Push-assist function may only be used when pushing the E-bike. Be
aware of danger of injury when bike wheels do not have ground
contact while using the push-assist function.
Switching Lighting ON/OFF
To switch on bike light, short press Light button. The lighting icon comes out
and display backlight brightness is automatically reduced.
Likewise, short press the Light button again, the bike light switches off. The
lighting icon is gone and display resumes backlight brightness.
Assist Level Selection
Display interface
Push-assistance mode
Switching the Lighting Mode On/Off Interface
To Next Page
Loading...
Need help?
General
