Troubleshooting
TO CORRECT A WARPED DOOR
Leave door open to expose both door
surfaces to the same outside condition for 24
to 48 hours. To accelerate the process, wet
the contracted (dry) door panel with a damp
towel or sponge and allow drying with both
door sides exposed.
TO PREVENT FUTURE WARPAGE
Thoroughly seal both sides of a straight door
with two coats of high quality moisture proof
wood sealant, so as to prevent any further
moisture exchange.
Never seal a warped door, as it might be
impossible to correct the condition after
treatment. Vinothèque is not responsible for
reversible moisture induced warpage of
unfinished doors or for door stained, and/or
sealed after shipment from the factory.
FREIGHT DAMAGE CLAIMS
In the event that damage has occurred to
your unit during shipping, it is the
responsibility of the distributor from which
you have bought the unit to work directly
with you and the freight company to
arrange for repairs or replacement. It is
critically important to inspect the unit
thoroughly at the time of delivery to assure
that any damage is observed and noted on
the shipping document. The freight
company will not accept liability for
damage without documentation on the
delivery paperwork.
-21-
To Next Page
Loading...