Vintage Keeper Tuscany 110 User Manual

Vintage Keeper Tuscany 110

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

~1~

TUSCANY

1 1 0

2 2 0

Plus WINE CELLAR

ASSEMBLY & OPERATION MANUAL

Table of Contents

Questions and Answers:

K
Kendra AlvarezJul 30, 2025
What to do if my Vintage Keeper Wine Cooler does not run when plugged in?
- H
  Heather RichardsonJul 30, 2025
  First, be aware that the Vintage Keeper Wine Cooler has a 1-minute delay between plugging it in and starting up to protect the compressor. Ensure the power supply is a dedicated, separately fused, and grounded 15 Amp, 120V line. If you must use an extension cord, it should be rated for 15 Amps. Avoid sharing the outlet with other appliances. If the unit is receiving power but the fans or compressor aren't running, unplug it for ten minutes and then try again.
S
Stephanie MartinezAug 13, 2025
Why is my Vintage Keeper Wine Cooler running but not cooling enough?
- E
  erin21Aug 13, 2025
  Your Vintage Keeper Wine Cooler may take a few days to reach the desired storage temperature, even if properly installed in an airtight cabinet. Ensure that you have applied silicone caulking to any panel joints to create an airtight seal. Improve air circulation, adjust the door to seal tightly by repositioning the upper hinge and improving the cabinet level. Install the air deflector as directed. Increase the set temperature and fan speed to 'EFFICIENT'. Clean the fan and grille areas. Reduce ambient temperatures and compensate for additional heat gain if any cabinet walls receive direct sunlight.

Vintage Keeper Tuscany 110 Specifications

General

Capacity	110 bottles
Lock	Yes
Temperature Range	5°C to 18°C
Shelves	Wooden
Door	Glass door

Summary

READ BEFORE YOU START

LOCATING YOUR WINE CELLAR

Proper placement and environmental conditions for optimal operation and longevity.

STEP 1 : PANEL PREPARATION

STEP 2 : CABINET ASSEMBLY

STEP 3 : HINGE, BASE AND LEGS INSTALLATION

STEP 4 : SHELVES

STEP 5 : COOLING UNIT INSTALLATION

STEP 7 : DOOR INSTALLATION

CONTROLS AND OPERATION

CONTROLLER OPERATION MODES

SAFETY FEATURES AND ALARMS

Information on alarm conditions, reset procedures, and overflow warnings.

TROUBLE SHOOTING GUIDE

COMMON OPERATIONAL ISSUES

Troubleshooting common problems like unit not running or insufficient cooling.

Related product manuals

Vintage Keeper Tuscany 250

Vintage Keeper Tuscany 500