VIOMI V-RVCLM21B User Manual

9
Routine Maintenance
HEPA Component
Follow the figure to remove the HEPA component and clean it.
Rolling Brush
1. Turn over the lower clip to remove the cover for the middle motor;
2. Take out the rolling rush and clean the bearing;
3. Clean the rolling brush;
4. Reinstall the rolling brush and fasten the clip of the cover.
Note: Replace the rolling brush every 6-12 months to ensure the cleaning
effect.
Side Brush
Remove and clean the side brush regularly.
Boundary Sensor
Clean the boundary sensor with soft cloth regularly
■
■
■
Cover for middle motor
Cl
ip
Ro
lling brush
B
earing
B
oundary sensor
Replace the HEPA component every three months as it is
notwashable;
Clean the HEPA component with cleaning brush regularly
to avoid blockage;
Replace the side brush every three months to ensure the
cleaning effect.

VIOMI V-RVCLM21B Specifications

General

Brand	VIOMI
Model	V-RVCLM21B
Category	Vacuum Cleaner
Language	English