Need help?Do you have a question about the VIPA SM 231 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Input Voltage | 24 VDC |
| Response Time | 1 ms |
| Mounting Type | DIN Rail |
| Power Supply | 24 VDC |
| Relative Humidity | 5% to 95% (non-condensing) |
Outlines the manual's purpose, scope, and objectives.
Identifies the intended readers of the manual.
Describes how the manual is organized into chapters.
Explains the available guides within the manual.
States the formats in which the manual is available.
Explains the meaning of icons used for highlighting text.
Describes how headings are used to highlight important passages.
Lists the intended applications for the System 200V.
Specifies where the manual must be available.
Notes that national regulations apply to unit disposal.
Provides an introduction to the VIPA System 200V.
Details precautions for handling electrostatic sensitive modules.
Explains the modular automation system's structure and components.
Specifies the physical dimensions of the system's basic enclosure.
Guides on installing modules using profile rails and bus connectors.
Provides step-by-step instructions for removing and replacing modules.
Explains the connection methods for peripheral modules using spring-clip connectors.
Covers interference-free deployment and electromagnetic compatibility (EMC).
Lists general specifications like profile rail, reliability, and environmental conditions.
Discusses cabling for analog signals and connecting sensors.
Explains analog value representation in Siemens S7 format.
Details the 4-channel analog input module for ±10V signals.
Describes the 4-channel analog input module for current signals.
Covers the 4-channel, 16-bit analog input module with multi-input capability.
Details a 4-channel, isolated analog input module for current signals.
Explains a 4-channel, isolated analog input module for voltage signals.
Describes an 8-channel, 16-bit analog input module.
Covers a 4-channel, fast analog input module with 16-bit resolution.
Details diagnostic interrupt, function number, and option byte settings.
Discusses cabling for analog signals and connecting loads.
Explains how analog values are processed in binary format.
Offers formulas for converting Siemens S7 format values.
Details a 4-channel analog output module for ±10V and 0-10V signals.
Covers a 4-channel analog output module for 0/4-20mA signals.
Describes a 4-channel analog output module with multi-output capability.
Discusses cabling for analog signals and connecting sensors/loads.
Details a module with 2 analog inputs and 2 analog outputs.
Illustrates the module's electrical connections and internal schematic.
Explains the structure and usage of parameter data for configuration.
Details wire break, diagnostic interrupt, and CPU-Stop reaction settings.
Lists available functions and their assignments for channels.
Covers a module with 4 analog inputs and 2 analog outputs.
Specifies the data ranges for input and output channels.
Explains analog value representation in two's complement format.
Introduces the combination module with digital and analog capabilities.
Details the structure and pin assignment of the module's I/O.
Describes the analog inputs and outputs, their configurations, and properties.
Guides on configuring the analog part using GSD files and SIMATIC manager.
Explains the digital input/output capabilities and status indicators.
Provides a quick overview of the counter functions and configuration.
Details the different operating modes for the counter function.
Explains gate, latch, comparison, hysteresis, and alarm functions for counters.
Covers process alarms and diagnostic data for counter functions.
Provides comprehensive technical specifications for the combination module.
To Next Page