VIPA SM 231 - Page 115

Manual VIPA System 200V Chapter 4 Analog input/output modules
HB97E - SM-AIO - Rev. 12/32 4-9
Output range (Channel 2, Channel 3)
No. Function Output or input range
00h Does not affect permanently stored configuration data
01h
Voltage ±10V
Siemens S5 format
(two’s complement)
±12.5V
12.5V = End overdrive region (20480)
-10...10V = nominal range (-16384...16384)
-12.5V = End underdrive region (-20480)
02h Voltage 1...5V
Siemens S5 format
(two’s complement)
0...6V
6V = End overdrive region (20480)
1...5V = nominal range (0...16384)
0V = End underdrive region (-4096)
05h Voltage 0...10V
Siemens S5 format
(two’s complement)
0...12.5V
12.5V = End overdrive region (20480)
0...10V = nominal range (0...16384)
no underdrive region available
09h
Voltage ±10V
Siemens S7 format
(two’s complement)
±11.76V
11.76V= End overdrive region (32511)
-10V...10V = nominal range (-27648...27648)
-11.76 = End underdrive region (-32512)
0Ah Voltage 1...5V
Siemens S7 format
(two’s complement)
0...5.704V
5.704V = End overdrive region (32511)
1...5V = nominal range (0...27648)
0V = End underdrive region (-6912)
0Dh Voltage 0...10V
Siemens S7 format
(two’s complement)
0...11.76V
11.76V= End overdrive region (32511)
0...10V = nominal range (0...27648)
no underdrive region available
03h
Current ±20mA
Siemens S5 format
(two’s complement)
±25.0mA
25mA = End overdrive region (20480)
-20...20mA = nominal range (-16384...16384)
-25mA = End underdrive region (20480)
04h Current 4...20mA
Siemens S5 format
(two’s complement)
0...24mA
24mA = End overdrive region (20480)
4...20mA = nominal range (0...16384)
0mA = End underdrive region (-4096)
06h Current 0...20mA
Siemens S5 format
(two’s complement)
0...25mA
25mA = End overdrive region (20480)
0...20mA = nominal range (0...16384)
no underdrive region available
0Bh
Current ±20mA
Siemens S7 format
(two’s complement)
±23.52mA
23.52mA = End overdrive region (32511)
-20...20mA = nominal range (-27648...27648)
-23.52mA = End underdrive region (-32512)
0Ch Current 4...20mA
Siemens S7 format
(two’s complement)
0...22.81mA
22.81mA = End overdrive region (32511)
4...20mA = nominal range (0...27648)
0mA = End underdrive region (-6912)
0Eh Current 0...20mA
Siemens S7 format
(two’s complement)
0...23.52mA
23.52mA = End overdrive region (32511)
0...20mA = nominal range (0...27648)
no underdrive region available
FFh Channel not active (turned off)
Note!
Leaving the defined range, the output is 0V res. 0A!