Need help?Do you have a question about the VIPA CPU 314ST and is the answer not in the manual?
General| Supply voltage | 24 V DC |
|---|---|
| Analog outputs | 2 |
| Protection class | IP20 |
| Series | 300S |
| Interface | MPI |
| Operating Temperature | 0°C to 60°C |
Overview of the SPEED7 CPU 314-6CF03, its technology, and integrated components.
Instructions for assembling SPEED-Bus profile rails and modules.
Guidelines for assembling modules on a standard bus profile rail.
Procedures and precautions for cabling power supplies and modules.
Lists key features and specifications of the CPU 314-6CF03.
Provides comprehensive technical specifications for the CPU.
Describes the CPU's behavior after power-on and reset.
Explains how addresses are allocated for peripheral modules.
Procedure for configuring I/O modules within the hardware configuration.
Steps for configuring the Ethernet PG/OP channel, including IP assignment.
Details on setting standard CPU parameters like general settings and startup.
Description of the CPU's operating modes: STOP, START-UP, RUN, HOLD.
Procedures for performing an overall reset of the CPU.
Instructions and precautions for updating the CPU firmware.
Procedure to reset the CPU to its factory default state.
Guide to reading and interpreting CPU diagnostic entries and event IDs.
Details the analog and digital I/O ranges and pin assignments.
Explains the mapping of I/O addresses for input and output areas.
Description of analog input/output channels, their pin assignments, and access.
Introduction to PROFIBUS DP, its applications, and versions.
Steps for configuring the CPU for PROFIBUS DP master/slave.
To Next Page