The installation and the registration of WinPLC7 has the following
approach:
1. For installation of WinPLC7 start the setup program of the corre-
sponding CD respectively execute the online received exe file.
2. Select the according language.
3. Accept the licensing agreement.
4. Set an installation directory and a group assignment and start
the installation.
1. Start WinPLC7.
ð
A ‘Demo’ dialog is shown
2. Click at [Activate Software].
ð
The following dialog for activation is shown:
3. Fill in the following fields:
n Email-Addr
.
n Your Name
n Serial number
The serial number may be found on a label at the CD case of
WinPLC7.
4. If your computer is connected to Internet you may online request
the Activation Key by [Get activation key via Internet]. Otherwise
click at [This PC has no access to the Internet] and follow the
instructions.
ð
With successful registration the activation key is listed in the
dialog window respectively is sent by email.
5. Enter this at ‘Activation code’ and click at [OK].
ð
Now
, WinPLC7 is activated as "Profi" version.
Installation WinPLC7
Demo
Activation of the "Profi"
version
VIPA System 300SWinPLC7
Installation
HB140 | CPU | 314-6CF03 | GB | 16-43 206
To Next Page
Loading...