What to do if my Vipe Stereo System has no sound when power is on?
If your Vipe Stereo System has no sound when powered on, ensure there is a signal on the input line. Also, adjust the volume and turn on the voice switch. You may also need to insert a USB/SD Card.
Why is there sound distortion in my Vipe X7 Stereo System?
Sound distortion in your Vipe Stereo System can be due to an audio file error. Check and modify the audio file. Alternatively, try turning down the volume.
What to do if there is no sound when playing USB/SD media on my Vipe X7 Stereo System?
If there is no sound when playing USB/SD media on your Vipe Stereo System, the track format may be incorrect. The track format should be MP3/WMA. You can also try switching the power off and then on, or ensure the USB/SD card is properly plugged in.
Why does the microphone have no sound on my Vipe X7?
If the microphone has no sound on your Vipe Stereo System, make sure the microphone socket is completely plugged in. Also, ensure the microphone is switched on and the microphone volume is properly adjusted.
How to fix Bluetooth Wireless connection failure on Vipe Stereo System?
To fix a Bluetooth wireless connection failure on your Vipe Stereo System: * Find the name of the desired device or use a toothpick to press the "reset" button on the inner aux in jack to restore factory settings. * Make sure you have connected to the right device. * Try to keep away from barriers such as walls and glasses.
What to do if the top panel can’t be operated on my Vipe Stereo System?
If the top panel of your Vipe Stereo System can’t be operated, press the reset button with a toothpick; the reset button is hidden in the inner Aux in jack. You can also long-press the "POWER" button on the RC to power it off, and then press the "POWER" button on the top panel to power it on.
Why are there problems with FM Radio on my Vipe X7 Stereo System?
If you are experiencing problems with the FM Radio on your Vipe Stereo System, switch to the next channel and try again. Ensure the FM antenna is extended. You might also try installing the antenna at a different angle or using the “Auto scan” mode.
What to do about large interference in the microphone of my Vipe X7?
To reduce large interference in the microphone of your Vipe Stereo System: * Do not lean the microphone's head against the speaker. * Turn off the microphone when not in use. * Turn down the microphone volume. * Do not install the speaker close to interference sources.
General| Brand | Vipe |
|---|---|
| Model | X7 |
| Category | Stereo System |
| Language | English |
To Next Page
