Viper 5104 1-Way User Manual

Compliance, safety warnings, and legal notices for system operation.

Details on product warranty coverage and claims process.

Information on acquiring additional remote transmitters.

Explanation of symbols, terms, and conventions used in the manual.

How to activate system features using remote control buttons.

Step-by-step execution of basic and advanced system functions.

Procedure to secure the vehicle and activate the alarm system.

Procedure to deactivate the alarm system and unlock doors.

Functionality to start the vehicle's engine remotely.

Activating auxiliary functions or opening the trunk.

Arming the system without audible siren feedback.

Adjusting the remaining run time for remote start.

Activating or deactivating the Aux 1 output.

Temporarily disabling vehicle sensors for specific situations.

Engaging or disengaging the system's Valet mode.

Automatic engine start based on a programmed countdown timer.

Activating or deactivating the Aux 2 output.

Arming the system with specific sensor bypass.

Automatic engine start based on temperature or battery level.

Activating or deactivating the Aux 3 output.

Arming the system with all audible feedback disabled.

Activating the vehicle's defogger system remotely.

Activating or deactivating the Aux 4 output.

Accessing and modifying system settings via the remote.

Associating a new remote transmitter with the system.

Overview of configurable options for the remote control.

Feature to prevent accidental button presses on the remote.

Standard alarm activation and sensor behavior.

How the system detects impacts and triggers alerts.

Alarm response to door, hood, or trunk opening.

Partial alarm trigger for minor impacts.

Full alarm activation for major impacts or intrusions.

Procedure to disarm the system without a remote.

Notification of triggered alarm zones upon disarming.

System's method for handling excessive sensor triggers.

Allowing the engine to run while the vehicle is unattended.

Transferring engine control from remote start to ignition key.

Automatic engine start for battery maintenance or cold weather.

Automatic engine start based on a programmed countdown timer.

Automatic engine start based on timer, temperature, or battery.

Specific procedures for remote starting manual transmission cars.

Automatic arming of the system after exiting the vehicle.

Automatic re-activation of the alarm after it has been disarmed.

Temporary bypass of arming operations for one cycle.

Temporary disabling of alarm functions for service.

Managing system settings for multiple vehicles with one remote.

Using a single remote for multiple vehicles.

System configuration to recognize individual remote users.

Indicators for a weakening remote control battery.

Step-by-step guide for replacing the remote battery.

Requirements and recommendations for professional system installation.

Information on the vehicle's ability to use remote start.

Specific safety and operational notes for manual cars.