Need help?Do you have a question about the Viper 5706V and is the answer not in the manual?
General| Remote Start Range | Up to 1 mile |
|---|---|
| Two-Way Communication | Yes |
| LCD Remote | Yes |
| Number of Remotes | 2 |
| Keyless Entry | Yes |
| Shock Sensor | Yes |
| Siren | Yes |
| Number of Buttons on Remotes | 5 |
| Channels | 5 |
| Starter Kill | Yes |
| Alarm | Yes |
| Battery Backup | No |
| Dome Light Supervision | Yes |
| Trunk Release | Yes |
| Panic Mode | Yes |
| Valet Mode | Yes |
| System Type | Security and Remote Start System |
| Remote Start Features | Turbo Timer |
| Alarm Features | Stinger DoubleGuard shock sensor, Revenger six-tone siren |
Instructions for charging the Responder LC remote control via USB to ensure proper operation.
Details the features and descriptions of the Responder LC remote control components like display and buttons.
Explains icons related to system status, armed/locked/disarmed states, and siren status.
Covers Keypad Lock and Auto Unlocking features for remote button management.
Detailed instructions for pairing a new remote control with the vehicle system.
Details on system arming, starter kill, and how the shock sensor detects impacts.
Procedures for taking over from remote start, safe-lock, and disabling the feature.
Introduction to advanced start features like Timer and Smart Start.
Specific safety precautions and operating procedures for manual transmission vehicles.
Table detailing parking light flashes, possible faults, and solutions for remote start failures.
Information on low battery indicators, alerts, and precautions for the LC remote.
Important safety warnings regarding installation and the operation of remote start systems.
Specific safety precautions and operating procedures for manual transmission vehicles.
Guidance on sensor adjustment and vehicle setup points for installation.
Procedures for learning the tachometer signal and initializing Virtual Tach.
Detailed steps for programming system features using the control button and remote.
Overview of available feature menus and their customizable options.
Procedure for resetting features to default or deleting paired remote controls.
Instructions for pairing new remote controls with the system for various remote types.
Summary of basic remote functions and navigation through feature menus.
To Next Page
